The technology of alignment of the ceiling

In general, there are 2 ways to make the ceiling even: “raw” and “dry”. In the first case, standard plastering and machine works are used. In the second, the manufacture of a falseboard is used, for example, from panels, racks, etc.D.

The second method is usually justified if the ceiling is brought to such a state that it is no longer possible to put it in order with the help of plaster and putty. Or

The “kind” neighbors helped from above, leaving an open crane in the kitchen or in the bathroom until you get persistent spots on your ceiling, or the ceiling is so curved that the first way to take in the first way to take irrevocably. The installation of a false flow greatly simplifies the leveling of a real ceiling, in addition, it significantly saves time.

Of course, about 20-30 years ago, the “raw” method was justified for the simple reason that there were still very few people knew about false flow. However, after people lived for several decades under a layer of putty, whitewashing and water -based, looked at cracks and cracks in the joints of the walls and ceiling, which, despite all the efforts of the hosts, often again appeared a couple of months after the procedure of raw alignment, they were We are glad to see the splendor that the false flow offered.

To still make the ceiling in an even “raw” way, you need to correctly prepare all the materials and perform certain operations in the correct sequence.

Firstly, before finishing, you need to clean the ceiling from everything that is on it, in other words, “blur” to concrete (or tear off, if there is something).

If the maximum difference in height does not exceed five centimeters, then alignment by the “damp” method is allowed, if the difference is higher- you can not do without false flow, although, recently there are already materials with which such changes and “” can be eliminated and “” Raw “method. To eliminate the difference in heights not exceeding 0.5 cm, aligning putty is used. After smearing putty on the ceiling, you must wait until it dries, and then polish the ceiling with sandpaper.

You can skip reading the entries and leave a comment. Link placement is prohibited.